W2395c

Der Entzerrer W2395c

bietet vielseitige Möglichkeiten zur klanglichen Beeinflussung von unterschiedlichstem Programm- Material. Das Gerät bietet je einen aktiven Baxandall-Klangregler für das Höhen- und Tiefenband sowie ein halb parametrisches Mittenbandfilter. Die beiden Pegelsteller der Baxandall-Klangregler sind als Flachbahnregler ausgelegt und ermöglichen eine Pegeländerung um jeweils +/- 12 dB. Schaltungsbedingt beeinflussen sich das Höhen- und Tiefenband je nach Stellung der Regler um bis zu 4 dB gegenseitig. Mittels zweier dreistufiger Kippschalter können die Frequenzbereiche von 80 Hz auf 110 Hz bei dem Tiefenband und von 2 kHz auf 5 kHz bei dem Höhenband umgeschaltet werden. In Mittelstellung des jeweiligen Kippschalters kann zur Überprüfung der Wirkungsweise das Filter deaktiviert werden ohne die Pegelsteller zu verändern. Das halb parametrische Mittenbandfilter entspricht der RS Schaltung des UF1 und bietet die Möglichkeit, das Frequenzband zwischen 155 Hz und 3500 Hz kontinuierlich um maximal +/- 10 dB zu bearbeiten. Die Güte des Mittenbandfilters kann über einen dreistufigen Kippschalter von schmal (Q-Faktor 1,5) auf mittel (Q-Faktor 0,7) oder breit (Q-Faktor 0,4) eingestellt werden. Ein Bypass führt das Eingangssignal unter Umgehung aller Filter direkt auf.



W2377

W2377 filter functions: 

• Level potentiometer with midway indent at 0dB • Frequency potentiometer for low, mid and high band filter • 9 stepped ELMA switch for the adjustment of the filter resonance (Q-factor) • Frequency selective high-pass and low-pass filter function • Illuminated switches for the true bypass and solo function • Illuminated button (Focus) activates the invert-function of the level control The three fully parametric RS Audio Technique W2377 filter modules covers the complete frequency range from 20Hz to 23KHz. The level potentiometer allow continuous gain settings with an effective range of +/-10dB. Furthermore the midway indent at 0dB facilitates the mechanical handling. The setting of the overlapping frequency bands (low, mid, high) with just three different modules allows a precise control of each band and offers the possibility to combine the modules at will. The filter resonance can be set in steps from 0,3 to 10 and the via left stop position respectively the right stop position a high-pass or low-pass filter can be activated. The frequency control adjust the limiting frequency of these filters. Via the illuminated switches and buttons a quick change between processed and unprocessed material is possible at any time. An Off switch activates the true bypass function, which removes the unit from the signal chain without undesired effects. In a network of more than one W2377 the Solo switch bypasses all operating units, so that only the chosen modul is active. The Focus button inverts the level of a module so that a quick selection of the frequency components, that has to be manipulated is easy. The units are aligned with the api® 500 series and can be integrated in any api® environment. High-quality ALPS® potentiometers and step switches from ELMA® ensure a long-term usage of the units in continuous operation. For the alignment of different studio environments the level matching of the in- and outputs can be adjusted with a variable resistor on the printboard.



We're social!

Connect with the Audiolounge community