EQ4M

In 1993, Cliff Maag

first introduced the AIR BAND to the audio world in the NTI EQ3. The EQ3 was a dual channel 6-band EQ powered in a 19 inch rack and to this day is hailed as one of the most musical equalizers ever made. Over two decades later, Maag Audio is Back in Rack! Introducing the Maag Audio EQ4M, a 6-band Dual Channel Mastering EQ.

More Power The EQ4M rides on extremely clean +-18v rails without the need of any supporting chassis or power source. Just plug it in and make music.

More Headroom More power, means more headroom. The EQ4M's extra 3v power boosts headroom to +29 dBu.

More Control The EQ4M offers more control with its true in/out bypass, a very transparent INPUT ATTN (attenuator), and an extra 15 kHz selection on the AIR BAND. 

All controls are stepped (detented). The frequency bands are the same as the EQ4-500 with the exception of the extra 15kHz for the AIR BAND.



EQ4 500

The Mäag EQ4™


is a one-channel six-band equalizer with AIR BAND™ (shelf boost from 2.5 to 40kHz), compatible with the API 500-6B lunchbox® and 500VPR rack systems. Following its EQ3 and EQ3-D predecessors, the EQ4 provides unparalleled transparency and top end presence while maintaining the true natural sound behind the mix. EQ adjustments are obtained with minimal phase shift and detent controls allow for easy recallable settings. Presented in the flagship 500 Series format, the EQ4 offers the legendary AIR BAND™ and five other sonically superior band passes. Specifications Frequency Response: -2 dB points, 10Hz & 75kHz Nominal Input Impedance (XLR): 48 K Ohms, balanced Nominal Output Impedance (XLR): 50 Ohms, balanced Headroom: +27 dBu THD + Noise:



EQ2 500

(500 Series) is a no compromise one channel 2 band equalizer with AIR BAND®, Low Mid Frequency (LMF) bell boost from SUB to 1.4 kHz, and an INPUT ATTN to control down to –12.5 dB of attenuation. The EQ2’s AIR BAND® is equipped with an additional sassy frequency selection @ 15 kHz, making the EQ2 hard to resist in any situation. The LMF provides both tight or wide bell curve options to dial in the perfect amount of warmth on the 2-bus. When it comes to tracking, the EQ2 will quickly become your favorite preamps’ “better half” by controlling the input (INPUT ATTN) (great for correcting over driven mic preamp transformers) before eq’ing with the versatile AIR BAND and LMF. The EQ2 is compatible with the API 500-6B lunchbox® and 500VPR rack systems and any other 500 Series spec rack. Following its EQ4® predecessor, the EQ2 provides unparalleled transparency and top end presence with the same high quality components found in the powerhouse 6 band EQ4. EQ adjustments are obtained with minimal phase shift and detent controls allow for easy recallable settings, even on the INPUT ATTN.